The Holden Commodore is a luxury vehicle built by the Australian manufacturer, Holden. The first generation of this car was manufactured between 1978 and 1986, but it returned in 2008 as the VE.
The VE Power Steering Pump is a component used for steering your vehicle. In most cases, this component will require replacement before 100,000 miles due to heavy use over time. It’s best that you replace it just in case so you can avoid any serious vehicle issues down the road!
Introducing the Holden Commodore Power Steering Pump.
The power steering pump is the heart of your vehicle’s steering system. It provides hydraulic power to the steering box and can be identified by its black casing and blue top. The pump is located on the driver’s side of the engine bay, just behind where your left knee would rest if you were sitting in a chair (if you’re not driving, this would be where your left foot rests).
The fluid from this pump circulates through hoses that connect it to both ends of your steering column: one connects directly to an input pipe that runs up through your firewall into the cabin, while another connects with a return pipe that runs back down below your vehicle’s floorboards. As long as these connections remain intact (and you’re not leaking any fluids), everything will work as intended!
This pump has been designed to replace your original steering pump that may have failed on you or is noisy.
This pump has been designed to replace your original steering pump that may have failed on you or is noisy. The replacement power steering pump has been designed to be compatible with a range of vehicles and is easy to install. It is durable and reliable, so you can be sure that it will work well for years to come!
So if you want to make sure that the part you’re buying is up to standard, look for one with an OE stamp on it! This means that it’s been tested and approved by the manufacturer of your vehicle.
Made with quality materials and comes with a 1 year warranty.
The Holden Commodore and VE Power Steering Pump is made with the highest quality materials. It comes with a 1 year warranty, covering parts, labor and freight. This warranty covers all of Australia. All makes and models are covered by this guarantee so you can buy with confidence knowing that you are protected from any problems that may arise within 12 months of your purchase date.
The replacement power steering pump has been designed to be compatible with a range of vehicles and is easy to install. It is durable and reliable, so you can be sure that it will work well for years to come!
Our pumps are designed to meet or exceed OE specifications
OE specifications are the highest quality. If a company is going to make a part for your car, they usually design it to meet or exceed OE specifications. This is because these parts can be used in both new and old cars, so they have to be designed well enough that they will work in any car with no problems. They also need to maintain the same level of safety as OEM parts (original equipment manufacturer).
It’s not just us saying this either! Most major manufacturers use OE specs as their benchmark when designing their own replacement parts, because they want you to be able to expect the same quality from their parts as you would get from an OEM part.
And finally: most major car manufacturers design their own vehicles’ parts according to OE specifications too—so if you’re buying those new fancy rims at Parts Factory for your Holden Commodore Supercar like we totally recommend doing…you’ll know that they’ve been carefully designed by Holden engineers and built by skilled craftsmen according to strict guidelines set forth by GM Australia themselves!
Providing an exact fit and hassle-free installation
Here at Parts Factory, we care about your time and money. That’s why we ensure that every part we sell is designed to be a perfect fit for your vehicle. With this in mind, our team of engineers has developed a range of Holden Commodore and VE Power Steering Pump products that can be installed without any need to cut or modify any parts on your vehicle.
As a result you won’t have to remove the old pump before installing the new one, nor will you have to bleed the system afterwards. It’s also quick and easy for anyone to install these pumps – no special tools or skills required!
Our power steering pumps are sourced from a range of manufacturers and tested for performance before we send them out to you. We also have a qualified technician on hand to answer any questions about fitting or using your new pumpWe also stock a range of Holden Commodore and VE Power Steering Pump components that can be used as replacements or upgrades for your vehicle’s original parts. If you’ve been looking for an alternative to the OEM products but don’t want to compromise on quality, then this is the place to find exactly what you need!.
Making the process extremely smooth for any DIY mechanic
A power steering pump is an essential part of your vehicle’s hydraulic system. It provides low-pressure fluid to the power steering gearbox, which then transfers it to the rack and pinion assembly. You may have noticed that when you turn the wheel, there is not much resistance from the pump and this means it is not working properly. The fluid becomes hot and expands as a result of friction inside it, so it needs to be cooled down before going through its cycle again for maximum efficiency. This can only happen if there are no leaks in your system or anything else that causes loss of pressure in any way whatsoever (such as having a worn out hose).
The Parts Factory has been supplying Holden Commodore owners with high quality replacement parts since 2009 and we stock hundreds of thousands at our warehouses across Australia – so you don’t have to worry about ordering something that won’t fit!
We have a range of pumps that will fit your vehicle and budget. You can even choose between an electric or mechanical pump depending on your preferences.
If you have a Holden Commodore and need a new power steering pump, contact us today!
For the best in Holden Commodore Power Steering Pumps, look no further than Parts Factory. We have a range of pumps that will fit your vehicle and budget. You can even choose between an electric or mechanical pump depending on your preferences. Contact us today to learn more about our products and services!
This is a genuine part that has been designed, manufactured and tested to meet or exceed the specifications of your vehicle. It has been manufactured to meet or exceed the quality of the parts supplied by Holden.
Conclusion
We hope you’ve enjoyed this article. If you have any questions or comments, please feel free to leave them below! We would love to hear from our readers and answer any concerns they may have. Feel free to contact us anytime with questions about our products or services as well.
The post Holden Commodore and VE Power Steering Pump at Parts Factory appeared first on Garcias Blogs.
from Garcias Blogs https://ift.tt/et0ocfI
via IFTTT
0 Comments